Bareiss testing devices - IRHD Compact III
Hardness tester digital, serial interface(Pat. 197 51 377))
Test Method
IRHD M (micro)
IRHD N (normal)
Resolution
0.1 IRHD M
0,1 IRHD N
Range of application
hoses, tubes O-rings, moulded parts, norm plates and seals
Minimum material thickness - IRHD M
0,6 - 5,0 mm
Minimum material thickness - IRHD N
6,0 - 10,0 mm
Standards
DIN ISO 48, NF T 46-003, ASTM D 1415, BS 903, Part. A26
The advantages of IRHD Compact III
MarkerIf needed, the IRHD M or IRHD N indenter
can be exchanged by customer easily.
Marker For control and calibration works, only the measuring device in the transport case will have to be sent to Bareiss, while the test stand is remaining in customer's company.
|
Type |
Ranges of Application | Material Thickness |
| SHORE A |
soft rubber, elastomers, natural rubber products, Neoprene, resin, Polyester, soft PVC, leather, etc. |
4 mm, DIN EN ISO 868 6 mm, DIN 53505 ISO 7619, ASTM D 2240 |
|
SHORE A0 L+L/c |
foams, soft elastic materials, foamed car , steering wheels |
6 mm |
|
Barcol SHORE D |
fibre plastics, hard rubber, hard plastic materials, Plexiglas, stiff thermo plastics, Formica, print roller, vinyl-plate, cellulose acetate, etc. |
1,5 mm 4 mm DIN EN ISO 868 6 mm DIN 53505 ISO 7619, ASTM D 2240 |
| SHORE B | middle hard rubber materials, typewriter rollers, etc. | 6 mm |
| SHORE C | plastics and middle hard rubber materials | 6 mm |
| SHORE D0 | plastics and middle hard up to hard rubber materials | 6 mm |
| SHORE 0 |
soft elastic materials, print rollers, middle firm textile fabrics, nylon, Orlon, Perlon, Rayon |
6 mm |
|
SHORE 00 / 000 / 000 S IRHD / DIDC supersoft |
sponge- and cellular rubber, foam rubber, silicone, |
6 mm 2 mm |
| IRHD / DIDC M | thin walled O-rings, moulded parts, standard blocks | 0,6 mm - 5 mm |
| IRHD / DIDC N |
soft rubber, highly elastic materials, plastically deformable materials |
6 mm - 10 mm |
| IRHD / DIDC L | materials like IRHD N | 10 mm - 12 mm |
| IRHD / DIDC H | hard materials like SHORE D | 6 mm - 10 mm |