Portable Engineering Drill

GY-50-1 portable engineering drill is adopted with hydraulic pressure feeding structure, it can proceed attacking and gyrating drilling, and can be towing removal. The drill is usually used for the engineering geological reconnaissance in road, bridge foundation, dam site、prospecting, or industrial and civil architecture, it can also used in drilling exploratory blast hole. The drill is applicable in plough layer,、 clay,、sand seam,、sand and stone seam,、sand and boulder bed in Quaternary overburden layer. It can get tube sample in varied depth, and it can used in coring and boring in bedrock.

Basic Parameters : ------------------------------------------------------
Drilling depth : 50m
Drilling diameter : 110mm
Drill pipe diameter : 42mm
Gross weight of drilling machine : 400kg
Dimension (length ×width × height) : 1660 × 732 × 1170 mm
Revolving Plate : --------------------------------------------------------
Rotate speed : 54 140 300 r/min
Maximum torque : 350N*m
Driving travel : 400mm
Maximum Cylinder driving force : 1,0000N
Maximum Cylinder lifting force : 30,000N
Lifter : ---------------------------------------------------------------------
Lifting capacity(single pipe low speed) : 10,000N
Bobbin linespeed : 0.14 0.32 0.68 0.46 1.17 2.53 m/s
Bobbin diameter : 100mm
Rope diameter : 9.3mm
Rope capacity : 18m
Drilling rig : --------------------------------------------------------------
Type : Tripod
Height : 5.6m
Drive motor : ------------------------------------------------------------
Type : 185N
Rated power : 8.82KW
Tare weight : 96kg